16mm Elbow Connector for Drip Irrigation

16mm Elbow Connector for Drip Irrigation

This 16mm elbow connector creates a compact 90-degree direction change between compatible drip lateral hose sections. It helps route irrigation lines around bed corners, paths and layout boundaries without sharply kinking the hose.

Product Highlights

• Nominal 16mm drip fitting
• 90-degree elbow connection
• For compatible lateral hose sections
• Helps avoid sharp pipe bends
• Suitable for garden, nursery and farm layouts

Specifications

Installation Guidance

1. Turn off and depressurise the water supply.
2. Cut compatible lateral hose ends square and clean.
3. Push each hose end fully onto the correct side of the elbow.
4. Arrange the hose without pulling or twisting the joint.
5. Restore pressure slowly and check both connections for leaks.

Compatibility and Care

The 16mm description is nominal and does not guarantee compatibility with every hose. Confirm actual inner or outer dimensions and fitting style. Avoid excessive pressure, vehicle traffic, sharp tools and unsupported tension at the elbow.

Explore more drip irrigation products. For wholesale orders, call or WhatsApp 9944117372.

Frequently Asked Questions

What angle does this connector make?

It creates a 90-degree direction change.

Does it connect directly to a tap or timer?

No direct tap or timer connection is stated. It is listed as a 16mm lateral-hose elbow.

Will it fit every 16mm lateral pipe?

Not necessarily. Confirm the actual hose dimensions and connector style before ordering.

What should I do if it leaks?

Depressurise the system, check for a clean square cut and full insertion, then confirm that the hose and fitting are compatible.